BIL NAME TITLE YEAR TIER
1 Assoc. Prof. Dr. Farazila Yusof Ai Ting Tan, Ai Wen Tan, Farazila Yusof, Effect of ultrasonic vibration time on the Cu/Sn-Ag-Cu/Cu joint soldered by low-power-high-frequency ultrasonic-assisted reflow soldering, Ultrasonics Sonochemistry, 2017, 34, 616 625 (ISI-Indexed) 2017 ISI
2 Assoc. Prof. Dr. Farazila Yusof Seyed Mohsen Mousavi, Ardeshir Bahreininejad, Siti Nurmaya Musa, Farazila Yusof,A modified particle swarm optimization for solving the integrated location and inventory control problems in a two-echelon supply chain network. J. Intelligent Manufacturing, 2017, Vol. 28, 191-206 (ISI-Indexed) 2017 ISI
3 Assoc. Prof. Dr. Farazila Yusof M Alabdullah, A Polishetty, J Nomani, S Emamian, P Hussain, M Awang, T Arumugam, F Yusof, MSM Saheed, NM Mohamed, M Mehrpouya, S Hamdavi, TVVLN Rao, M Muhammad, KM Faez, HH Ya, R Ahmad, ZM Sheggaf, MBA Asmael, I Eslami Afrooz, C Mohan Sinnathambi, D Ling Chuang, S Karuppana, Materials Science & Engineering Technology. Materialwissenschaft und Werkstofftechnik, 2017, Vol. 3, 4 (ISI-Indexed) 2017 ISI
4 Assoc. Prof. Dr. Farazila Yusof Jamadon N.H., Ahmad N.D., Yusof F., Ariga T., Miyashita Y., Shukor M.H.A. (2017) Effect of Isothermal Aging on Mechanical Properties of Sn-3.0Ag-0.5Cu Solder Alloy with Porous Cu Interlayer Addition. In: Awang M. (eds) 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore 2017 ISI
5 Assoc. Prof. Dr. Farazila Yusof S Emamian, M Awang, F Yusof, P Hussain, M Mehrpouya, S Kakooei, M Moayedfar, Adeel Zafar. (2017) A Review of Friction Stir Welding Pin Profile. In: Awang M. (eds) 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore 2017 ISI
6 Assoc. Prof. Dr. Farazila Yusof Shamini Janasekaran, Farazila Yusof, Harizam Mohd Zin, Mohd Fadzil Jamaludin, Mohd Hamdi Abdul Shukor (2017). Int J Adv Manuf Technol (2017). doi:10.1007/s00170-017-0073-z 2017 ISI
7 Assoc. Prof. Dr. Farazila Yusof Janasekaran, Shamini, et al. “Influence of BA4047 filler addition through Mamdani fuzzy logic optimization for double-sided T-joint welding of aluminum alloys using low-power fiber laser.” The International Journal of Advanced Manufacturing Technology (2017): 1-11. 2017 ISI
8 Assoc. Prof. Dr. Farazila Yusof MM Quazi, MA Fazal, ASMA Haseeb, Farazila Yusof, HH Masjuki, A Arslan, Laser Composite Surfacing of Ni-WC Coating on AA5083 for Enhancing Tribomechanical Properties. Tribology Transactions, 2017, Vol. 60, 249-259, Taylor & Francis 2017 ISI
9 Assoc. Prof. Dr. Farazila Yusof Abdollah Bahador, Esah Hamzah, Katsuyoshi Kondoh, Tuty Asma Abu Bakar, Farazila Yusof, Hisashi Imai, Safaa N Saud, Mustafa K Ibrahim, Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti–23 at% Nb shape-memory alloys. Materials & Design, 2017, Vol. 118, 152-162, Elsevier 2017 ISI
10 Assoc. Prof. Dr. Farazila Yusof Emamian, S., Hussain, P., Awang, M., Arumugam, T., Yusof, F., Saheed, M. S. M. and Mohamed, N. M. (2017), Comparison of carbon-based nanomaterials characteristics on H13 tool steel. Mat.-wiss. u. Werkstofftech., 48: 198–204. doi:10.1002/mawe.201600757 2017 ISI
11 Assoc. Prof. Dr. Farazila Yusof L Maisarah, F Yusof, S Ramesh, T Ariga, M Hamdi, A novel method of brazing Cu/Cu-7.0Ni-9.3Sn-6.3P/Cu using microwave hybrid heating. Materialwissenschaft und Werkstofftechnik, 2017, Vol. 48, 299-305. 2017 ISI
12 Assoc. Prof. Dr. Farazila Yusof AT Tan, AW Tan, F Yusof, Evolution of microstructure and mechanical properties of Cu/SAC305/Cu solder joints under the influence of low ultrasonic power. Journal of Alloys and Compounds. Journal of Alloys and Compounds, 2017, Vol. 705, 188-197, Elsevier 2017 ISI
13 Assoc. Prof. Dr. Farazila Yusof Bahador, A., Hamzah, E., Kondoh, K., Abubakar, T., Yusof, F., Saud, S. N., … & Ezazi, M. A. (2017). Defocusing Effects of Laser Beam on the Weldability of Powder Metallurgy Ti-Based Shape Memory Alloys. Procedia Engineering, 184, 205-213. 2017 ISI
14 Assoc. Prof. Dr. Farazila Yusof Noh, F. S., Zin, H. M., Alnasser, K., Yusoff, N., & Yusof, F. (2017). Optimization of Laser Lap Joining between Stainless Steel 304 and Acrylonitrile Butadiene Styrene (ABS). Procedia Engineering, 184, 246-250. 2017 ISI
15 Dr. Siti Nurmaya Musa Mousavi M, Yap HJ, Musa SN, Tahriri F, Md Dawal SZ (2017) Multi-objective AGV scheduling in an FMS using a hybrid of genetic algorithm and particle swarm optimization. PLoS ONE 12(3): e0169817. doi:10.1371/journal.pone.0169817 (ISI/SCOPUS Indexed Publication) 2017 ISI/SCOPUS
16 Dr. Siti Nurmaya Musa Maryam Mohammadi and S. Nurmaya Musa* (2017). Optimal cycle time for production-inventory systems considering shelf life and backordering. Int. J. Procurement Management, Vol. 10, No. 3, 2017 311 (SCOPUS-Indexed) 2017 SCOPUS
17 Dr. Siti Nurmaya Musa Mousavi, S. M., Bahreininejad, A., Musa, S. N., & Yusof, F. (2017). A modified particle swarm optimization for solving the integrated location and inventory control problems in a two-echelon supply chain network. J. Intelligent Manufacturing, 28(1), 191-206. 2017 ISI
18 Dr. Siti Nurmaya Musa Fallahpour, A., Olugu, E. U., & Musa, S. N. (2017). A hybrid model for supplier selection: integration of AHP and multi expression programming (MEP). Neural Computing and Applications, 28(3), 499-504. 2017 ISI
19 Dr. Siti Nurmaya Musa Mousavi, M., Yap, H. J., Musa, S. N., & Dawal, S. Z. M. (2017). A FUZZY HYBRID GA-PSO ALGORITHM FOR MULTI-OBJECTIVE AGV SCHEDULING IN FMS. a a, 1(1), 1. 2017 ISI
20 Dr. Siti Nurmaya Musa Fallahpour, A., Olugu, E. U., Musa, S. N., Wong, K. Y., & Noori, S. (2017). A decision support model for sustainable supplier selection in sustainable supply chain management. Computers & Industrial Engineering, 105, 391-410. 2017 ISI
21 Dr. Noor Azizi Mardi Wan Hassan WN, Yusof Y, Mardi NA (2017) Comparison of reconstructed rapid prototyping models produced by three-dimensional printing and conventional stone orthodontic models with different degrees of crowding. American Journal of Orthodontics and Dentofacial Orthopedics. 151(1):209-18 (Tier 2, Impact Factor = 1.690) (ISI-Indexed) 2017 ISI
22 Dr. Noor Azizi Mardi Jalaludin, A. H., Shukor, M. H. A., Mardi, N. A., Sarhan, A. A. D. M., Ab Karim, M. S., Besharati, S. R., … & Dambatta, Y. S. (2017). Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes. The International Journal of Advanced Manufacturing Technology, 1-10. 2017 ISI
23 Dr. Noor Azizi Mardi Dabbagh, V., Sarhan, A. A., Akbari, J., & Mardi, N. A. (2017). Design and experimental evaluation of a precise and compact tubular ultrasonic motor driven by a single-phase source. Precision Engineering, 48, 172-180. 2017 ISI
24 Dr. Noor Azizi Mardi Dabbagh, V., Sarhan, A. A., Akbari, J., & Mardi, N. A. (2017). Design and manufacturing of ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area. Measurement. 2017 ISI
25 Dr. Noor Azizi Mardi M Sparham, AAD Sarhan, NA Mardi, M Hamdi, M Dahari (2017). ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system. Journal of Manufacturing Processes, 28, 168-185, Elsevier 2017 ISI
26 Mr. Mohd Fadzil Jamaludin Janasekaran, S., Yusof, F., Zin, H. M., Jamaludin, M. F., & Shukor, M. H. A. (2017). A fuzzy logic-based prediction model for fracture force using low-power fiber laser beam welding. The International Journal of Advanced Manufacturing Technology, 1-8. 2017 ISI
27 Mr. Mohd Fadzil Jamaludin Janasekaran, S., Jamaludin, M. F., Yusof, F., Shukor, M. H. A., & Ariga, T. (2017). Influence of BA4047 filler addition through Mamdani fuzzy logic optimization for double-sided T-joint welding of aluminum alloys using low-power fiber laser. The International Journal of Advanced Manufacturing Technology, 1-11. 2017 ISI
28 Dr. Mohd Sayuti Abd Karim Mohd Amran, N. A. B., Sayuti, M., Abd Rashid, R. B., Alghani, W., & Derahman, N. A. B. (2017). Material characterization of tribological effects in HSS hacksaw blade. Industrial Lubrication and Tribology, 69(3). (ISI-Indexed) 2017 ISI
29 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh Novel development towards preparation of highly efficient ionic liquid based co-polymer electrolytes and its application in dye-sensitized solar cells. N.A.A. Latip, H.M. Ng, N. Farah, K. Ramesh, S. Ramesh, S. Ramesh. Organic Electronics, 41, 33-41 (2017) (ISI/WoS Publication). (ISI-Indexed) 2017 ISI
30 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh Formation of neodymium oxide by thermal oxidation of sputtered Nd thin film on Si substrate. Karuppiah Hetherin, S. Ramesh, Yew Hoong Wong. Journal of Materials Science: Materials in Electronics (2017). doi:10.1007/s10854-017-7009-0 (ISI/WoS Publication). (ISI-Indexed) 2017 ISI
31 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh Osteogenic priming potential of bovine hydroxyapatite sintered at different temperatures for tissue engineering applications. A. Niakan, S. Ramesh, S.V. Naveen, S. Mohan, T. Kamarul. Materials Letters, 197, 83-86 (2017). (ISI/WoS Publication). (ISI-Indexed) 2017 ISI
32 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh S. Ramesh, W.J.K. Chew, H.C.A. Chee, C.Y. Tan. Sintering behaviour and properties of flyash-doped zirconia. Materials Science Forum, 894, 85-88 (2017) (Trans Tech Publications, Switzerland; doi:10.4028/www.scientific.net/MSF.894.85) (SCOPUS-Indexed) 2017 SCOPUS
33 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh Thermal phase stability and properties of hydroxyapatite derived from bio-waste eggshells. M. Amiri Roudan, S. Ramesh, A. Niakan, Y.H. Wong, M. Akhtari Zavareh, Hari Chandran, W.D. Teng, N. Lwin and U. Sutharsini. Journal of Ceramic Processing Research, 18 [1] 69-72 (2017) (ISI/WoS Publication). (ISI-Indexed) 2017 ISI
34 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh U. Sutharsini, M. Thanihaichelvan, C.H. Ting, S. Ramesh, C.Y. Tan, Hari Chandran, Ahmed A.D. Sarhan, S. Ramesh, I. Urri s. Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals. Ceramics International, 43, 7594-7599 (2017) http://dx.doi.org/10.1016/j.ceramint.2017.03.052 (ISI/WoS Publication). (ISI-Indexed) 2017 ISI
35 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh C. F. Mok, Y. C. Ching, F. Muhamad, N. A. Abu Osman & Ramesh Singh. Poly(vinyl alcohol)- -chitin composites reinforced by oil palm empty fruit bunch fiber-derived nanocellulose. International Journal of Polymer Analysis and Characterization (In Press, 2017), http://dx.doi.org/10.1080/1023666X.2017.1288345 (ISI/WoS Publication). (ISI-Indexed) 2017 ISI
36 Professor. Ir. Dr. Ramesh Singh A/L Kuldip Singh U.G. Thennakoon Mudiyanselage Sampath, Yern Chee Ching, Cheng Hock Chuah, Ramesh Singh, Pai-Chen Lin. Preparation and characterization of nanocellulose reinforced semi-interpenetrating polymer network of chitosan hydrogel. Cellulose (In Press, 2017), DOI 10.1007/s10570-017-1251-8 (ISI/WoS Publication). (ISI-Indexed) 2017 ISI
37 Dr. Tan Chin Joo Wen Tong Chong, Mohammed Gwani, Chin Joo Tan, Wan Khairul Muzammil, Sin Chew Poh and Kok Hoe Wong, Design and Testing of a Novel Building Integrated Cross Axis Wind Turbine, Applied Sciences 7(3), 251, 2017. http://dx.doi.org/10.3390/app7030251 (ISI/SCOPUS Indexed Publication) 2017 ISI
38 Ir. Dr. Woong Yew Hoong M. Amiri Roudan, S. Ramesh, A. Niakan, Y.H. Wong, M. Akhtari Zavareh, Hari Chandran, W.D. Teng, N. Lwin, U. Sutharsini. 2017. Thermal phase stability and properties of hydroxyapatite derived from biowaste eggshells. Journal of Ceramic Processing Research, 18, 69-72. (ISI-Indexed) 2017 ISI
39 Ir. Dr. Woong Yew Hoong Y.H. Wong, M.G. Affendy, S.K. Lau, P.C. Teh, H.J. Lee, C.Y. Tan, S. Ramesh. 2017. Effects of Anodization Parameters on Thin Film Properties: A Review. Materials Science and Technology. 33(6), 699-711. (ISI-Indexed) 2017 ISI
40 Ir. Dr. Woong Yew Hoong Y.H. Wong, C.Y. Lee, K. H. Goh. 2017. Influence of Applied Voltage on the Physical and Electrical Properties of Anodic Sm2O3 Thin Films on Si in 0.01 M NaOH Solution. Micro & Nano Letters. (Accepted). (ISI-Indexed) 2017 ISI
41 Ir. Dr. Woong Yew Hoong K.H. Goh, A.S.M.A. Haseeb, Y.H. Wong. 2017. Trap-Assisted Tunneling, Capacitance-Voltage Characteristics, and Surface Properties of Sm2O3 thin film on Si Substrate. Journal of Materials Science: Materials in Electronics, 28, 4725-4731. (ISI-Indexed) 2017 ISI
42 Ir. Dr. Woong Yew Hoong K. Hetherin, S. Ramesh, Y.H. Wong. 2017. Formation of neodymium oxide by thermal oxidation of sputtered Nd thin film on Si substrate. Journal of Materials Science: Materials in Electronics. (Accepted). (ISI-Indexed) 2017 ISI
43 Ir. Dr. Woong Yew Hoong Z.X. Lim, S. Sreenivasan, Y.H. Wong, F. Zhao, K.Y. Cheong. 2017. Filamentary Conduction in Aloe Vera Film for Memory Application. Procedia Engineering. 184, 655-662. (ISI-Indexed) 2017 ISI
44 Ir. Dr. Woong Yew Hoong Sopyan, I., Pusparini, E., Ramesh, S., Tan, C. Y., Ching, Y. C., Wong, Y. H., … & Bang, L. T. (2017). Influence of sodium on the properties of sol-gel derived hydroxyapatite powder and porous scaffolds. Ceramics International. 2017 ISI
45 Ir. Dr. Woong Yew Hoong Baharuddin, A. A., Ang, B. C., & Wong, Y. H. (2017). Self-Assembly and Electrical Characteristics of 4-Pentynoic Acid Functionalized Fe 3 O 4-γ-Fe 2 O 3 Nanoparticles on SiO 2/n-Si. Applied Surface Science. 2017 ISI
46 Ir. Dr. Woong Yew Hoong KH Goh, A Haseeb, YH Wong , (2017). Structural characteristics of samarium oxynitride on silicon substrate. Journal of Alloys and Compounds, Elsevier 2017 ISI
47 Dr. Tuan Zaharinie Tuan Zahari Hosseini, M., Sadri, R., Kazi, S. N., Bagheri, S., Zubir, N., Bee Teng, C., & Zaharinie, T. (2017). Experimental Study on Heat Transfer and Thermo-Physical Properties of Covalently Functionalized Carbon Nanotubes Nanofluids in an Annular Heat Exchanger: A Green and Novel Synthesis. Energy & Fuels, 31(5), 5635-5644. 2017 ISI
48 Dr. Tuan Zaharinie Tuan Zahari Amiri, A., Shanbedi, M., Rafieerad, A. R., Rashidi, M. M., Zaharinie, T., Zubir, M. N. M., … & Chew, B. T. (2017). Functionalization and exfoliation of graphite into mono layer graphene for improved heat dissipation. Journal of the Taiwan Institute of Chemical Engineers, 71, 480-493. 2017 ISI
49 Dr. Tuan Zaharinie Tuan Zahari Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Zubir, N., Ahmadi, G., … & Zaharinie, T. (2017). A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications. Chemical Physics Letters, 675, 92-97. 2017 ISI
50 Dr. Tuan Zaharinie Tuan Zahari Sadri, R., Hosseini, M., Kazi, S. N., Bagheri, S., Zubir, N., Solangi, K. H., … & Badarudin, A. (2017). A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids. Journal of Colloid and Interface Science, 504, 115-123. 2017 ISI
51 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Janasekaran, S., Yusof, F., Zin, H. M., Jamaludin, M. F., & Shukor, M. H. A. (2017). A fuzzy logic-based prediction model for fracture force using low-power fiber laser beam welding. The International Journal of Advanced Manufacturing Technology, 1-8. 2017 ISI
52 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Jamadon, N. H., Ahmad, N. D., Yusof, F., Ariga, T., Miyashita, Y., & Shukor, M. H. A. (2017). Effect of Isothermal Aging on Mechanical Properties of Sn-3.0 Ag-0.5 Cu Solder Alloy with Porous Cu Interlayer Addition. In 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (pp. 59-67). Springer, Singapore. 2017 ISI
53 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Dambatta, Y. S., Sarhan, A. A., Sayuti, M., & Hamdi, M. (2017). Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review. The International Journal of Advanced Manufacturing Technology, 1-34. 2017 ISI
54 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Jalaludin, A. H., Shukor, M. H. A., Mardi, N. A., Sarhan, A. A. D. M., Ab Karim, M. S., Besharati, S. R., … & Dambatta, Y. S. (2017). Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes. The International Journal of Advanced Manufacturing Technology, 1-10. 2017 ISI
55 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Janasekaran, S., Jamaludin, M.F., Yusof, F. et al. (2017). Influence of BA4047 filler addition through Mamdani fuzzy logic optimization for double-sided T-joint welding of aluminum alloys using low-power fiber laser. The International Journal of Advanced Manufacturing Technology, 1-11. Springer, Londan. 2017 ISI
56 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Eslami, N., Mahmoodian, R., Hamdi, M., Khatir, N. M., Herliansyah, M. K., & Rafieerad, A. R. (2017). Study the Synthesis, Characterization and Immersion of Dense and Porous Bovine Hydroxyapatite Structures in Hank’s Balanced Salt Solution. JOM, 4(69), 691-698. 2017 ISI
57 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Maisarah, L., Yusof, F., Ramesh, S., Ariga, T., & Hamdi, M. (2017). A novel method of brazing Cu/Cu‐7.0 Ni‐9.3 Sn‐6.3 P/Cu using microwave hybrid heating. Materialwissenschaft und Werkstofftechnik, 48(3-4), 299-305. 2017 ISI
58 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor Ibrahim, M. Z., Sarhan, A. A., Yusuf, F., & Hamdi, M. (2017). Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants–A review article. Journal of Alloys and Compounds. 2017 ISI
59 Prof. Ir. Dr. Mohd Hamdi Bin Abd Shukor M Sparham, AAD Sarhan, NA Mardi, M Hamdi, M. Dahari (2017). ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system. Journal of Manufacturing Processes, 28, 168-185. Elsevier. 2017 ISI
60 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Sarraf, M., Razak, B. A., Nasiri-Tabrizi, B., Dabbagh, A., Kasim, N. H. A., Basirun, W. J., & Sulaiman, E. B. (2017). Nanomechanical properties, wear resistance and in-vitro characterization of Ta 2 O 5 nanotubes coating on biomedical grade Ti–6Al–4V. Journal of the mechanical behavior of biomedical materials, 66, 159-171. 2017 ISI
61 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Rafieerad, A. R., Bushroa, A. R., Nasiri-Tabrizi, B., Baradaran, S., Shahtalebi, S., Khanahmadi, S., … & Basirun, W. J. (2017). In-vitro bioassay of electrophoretically deposited hydroxyapatite–zirconia nanocomposite coating on Ti–6Al–7Nb implant. Advances in Applied Ceramics, 1-14. 2017 ISI
62 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Rafieerad, A. R., Bushroa, A. R., Nasiri-Tabrizi, B., Crum, R., Gámez, C., Vadivelu, J., & Gupta, V. (2017). Vertically oriented ZrO 2-TiO 2-Nb 2 O 5-Al 2 O 3 mixed nanopatterned bioceramics on Ti6Al7Nb implant assessed by laser spallation technique. Journal of Alloys and Compounds. 2017 ISI
63 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Rafieerad, A. R., Bushroa, A. R., Nasiri-Tabrizi, B., Kaboli, S. H. A., Khanahmadi, S., Amiri, A., … & Wasa, K. (2017). Toward improved mechanical, tribological, corrosion and in-vitro bioactivity properties of mixed oxide nanotubes on Ti–6Al–7Nb implant using multi-objective PSO. Journal of the mechanical behavior of biomedical materials, 69, 1-18. 2017 ISI
64 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Mehran, Q. M., Fazal, M. A., Bushroa, A. R., & Rubaiee, S. (2017). A Critical Review on Physical Vapor Deposition Coatings Applied on Different Engine Components. Critical Reviews in Solid State and Materials Sciences, 1-18. 2017 ISI
65 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Adeleke, S. A., Bushroa, A., Kusumawan Herliansyah, M., Sopyan, I., Jefrey Basirun, W., & Ladan, M. (2017). Preparation, scratch adhesion and anti-corrosion performance of TiO2-MgO-BHA coating on Ti6Al4V implant by plasma electrolytic oxidation technique. Journal of Adhesion Science and Technology, 1-12. 2017 ISI
66 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Rafieerad, A. R., Bushroa, A. R., Nasiri-Tabrizi, B., Vadivelu, J., Yusof, F., & Baradaran, S. (2017). Graphene Oxide Modified Anodic Ternary Nanobioceramics on Ti6Al7Nb Alloy for Orthopedic and Dental Applications. Procedia Engineering, 184, 409-417. 2017 ISI
67 Assoc. Prof. Ir. Dr. Bushroa Abd Razak Adeleke, S. A., Bushroa, A. R., & Sopyan, I. (2017). Characteristic Features of Plasma Electrolytic Treated Layers in Na 3 PO 4 Solution. Procedia Engineering, 184, 732-736. 2017 ISI
68 Dr. Mohd Nashrul Mohd Zubir Rad Sadri, Maryam Hosseini, SN Kazi, Samira Bagheri, Nashrul Zubir, KH Solangi, Tuan Zaharinie, A Badarudin. 2017. A bio-based, facile approach for the preparation of covalently functionalized carbon nanotubes aqueous suspensions and their potential as heat transfer fluids. Journal of Colloid and Interface Science. 504 (115-123) 2017 ISI
69 Dr. Mohd Nashrul Mohd Zubir Rad Sadri, K Zangeneh Kamali, M Hosseini, Nashrul Zubir, SN Kazi, Goodarz Ahmadi, Mahidzal Dahari, NM Huang, AM Golsheikh. 2017. Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique. Journal of Dispersion Science and Technology. Vol : 38, Issue : 19(1302-1310) 2017 ISI
70 Dr. Mohd Nashrul Mohd Zubir Rad Sadri, Maryam Hosseini, SN Kazi, Samira Bagheri, Nashrul Zubir, Goodarz Ahmadi, Mahidzal Dahari, Tuan Zaharinie. 2017. A novel, eco-friendly technique for covalent functionalization of graphene nanoplatelets and the potential of their nanofluids for heat transfer applications. Chemical Physics Letters. Volume 675 (92-97) 2017 ISI
71 Dr. Mohd Nashrul Mohd Zubir Ahmad Amiri, Mohd Nashrul Mohd Zubir, Ayrat M Dimiev, KH Teng, Mehdi Shanbedi, SN Kazi, Shaifulazuar Bin Rozali. 2017. Facile, Environmentally Friendly, Cost Effective and Scalable Production of Few-Layered Graphene. Chemical Engineering Journal. Volume 326 (1105-1115) 2017 ISI
72 Dr. Mohd Nashrul Mohd Zubir Maryam Hosseini, Rad Sadri, Salim Newaz Kazi, Samira Bagheri, Nashrul Zubir, Chew Bee Teng, Tuan Zaharinie. 2017. Experimental Study on Heat Transfer and Thermo-Physical Properties of Covalently Functionalized Carbon Nanotubes Nanofluids in an Annular Heat Exchanger: A Green and Novel Synthesis. Energy & Fuels. Vol :31 (5635-5644) 2017 ISI
73 Dr. Mohd Nashrul Mohd Zubir Ahmad Amiri, Mehdi Shanbedi, AR Rafieerad, Mohammad Mehdi Rashidi, Tuan Zaharinie, Mohd Nashrul Mohd Zubir, SN Kazi, BT Chew. 2017. Functionalization and exfoliation of graphite into mono layer graphene for improved heat dissipation. Journal of the Taiwan Institute of Chemical Engineers.Vol:71(480-493) 2017 ISI
74 Dr. Mohd Nashrul Mohd Zubir Samira Gharehkhani, Hooman Yarmand, Mohammad Shahab Goodarzi, Seyed Farid Seyed Shirazi, Ahmad Amiri, Mohd Nashrul Mohd Zubir, Khalid Solangi, Rushdan Ibrahim, Salim Newaz Kazi, Somchai Wongwises. 2017. Experimental investigation on rheological, momentum and heat transfer characteristics of flowing fiber crop suspensions. International Communications in Heat and Mass Transfer. Vol : 80 (60-69) 2017 ISI
75 Dr. Rusdi Bin Abd Rashid Mohd Amran, N. A. B., Sayuti, M., Abd Rashid, R. B., Alghani, W., & Derahman, N. A. B. (2017). Material characterization of tribological effects in HSS hacksaw blade. Industrial Lubrication and Tribology, 69(3). (ISI-Indexed) 2017 ISI